Home Legend HL13 Installation Guide download pdf (Page 8)

Doc. ID: 122 Rev: 2 Effective: 2/24/2014 Page | 8

Step 4 – Install the remaining Rows

• Spread another section of glue. Never spread more that can be covered before the adhesive is set. If adhesive is set and will not

transfer to the back of the plank, scrape off the adhesive and apply fresh adhesive.

• Continue to install the next rows. Make sure there is a random staggering at the end joints of at least 6” apart.

• Do not forget the 1/2” space for expansion between floor and the walls.

• Repeat the process for additional rows.

• Make sure that there is 100% contact between the wood floor and the adhesive.

Finishing Touches

• Clean the floor.

• Use matching putty where necessary

• Install or reinstall all wall trim pieces. Nail them through the wall, but not to the subfloor to avoid restricting the expansion gap.

• Install transition trim pieces. Nail them to the subfloor, not the flooring.

• At doorways, transitions should be used to protect the edges of the floor and to provide a decorative transition from one floor type to

another.

• If the floor is to be covered, use a breathable material such as cardboard. Do not cover with plastic.

1 2 3 4 5 6 7 8 9 10 11

No comments

Home Legend HL13 Installation Guide Page 8