Home Legend HL13 Installation Guide

Browse online or download Installation Guide for Unknown Home Legend HL13. Home Legend HL13 Installation Guide User Manual

  • Download
  • Add to my manuals
  • Print
  • Page
    / 11
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 0
Installation Instructions
Engineered Bamboo Plywood Click Flooring
Visit homelegend.com for latest version of installation instructions.
Doc. ID: 122 Rev: 2 Effective: 2/24/2014 Page | 1
Products Included
Approved Grade Levels
Approved Installation Methods
Engineered Bamboo Plywood.
Click-Lock joints.
Above Grade.
On Grade.
Below Grade.
Primary Method: Floating.
Optional Method: Full Spread Glue.
Owner/Installer Responsibility
The owner is advised to be at home during the installation for consultation/direction. The owner and installer should discuss installation and
layout to maximize satisfaction. If this is not possible, consultation should be done prior to installation. Installers should be familiar with
installation guidelines from National Wood Flooring Association (woodfloors.org).
The owner/installer assumes all responsibility for product quality of completed installation.
PERFORM PRE-INSTALL INSPECTION. FOR CLAIMS PURPOSES, YOU ARE ALLOWED TO OPEN UP TO 4 BOXES FOR PRODUCT INSPECTION. DO NOT OPEN
ALL THE BOXES. OPENING ALL THE BOXES CONSTITUTES YOUR ACCEPTANCE OF THE PRODUCT. INSPECT ALL THE PLANKS IN THESE 4 BOXES CAREFULLY.
EXAMINE FLOORING FOR COLOR, FINISH AND QUALITY. IF YOU DISCOVER THAT PRODUCTS ARE DEFECTIVE, OR IF MATERIAL IS QUESTIONABLE, YOU
SHOULD CONTACT THE RETAILER. IF YOU ARE SATISFIED, PROCEED WITH INSTALLATION.
Prior to installation, rack up planks from several boxes to ensure uniform distribution of colors, shades and characters in the installed flooring.
Planks having similar widths should be placed together in the same row to minimize gaps between boards.
Bamboo floors are natural products containing natural variations. Variations in color, tone, grain, streaks, nodal marks and other characters
are found from plank to plank. Similar variations exist between samples, pictures and purchased flooring. They are normal and it does not
mean the product is defective.
Flooring to be installed in one large area should be purchased at the same time. Product purchased at a later time than the first purchase
may vary beyond your expectations.
Accessories, trims and moldings are manufactured to coordinate with the varied appearances of the floor planks. Any exact matches are
coincidental. Non-matching accessories are not defective products.
This product is manufactured according to strict quality standards. In the event that defects are discovered in the field, the industry
standards permit a defect tolerance not to exceed 5%. The defects may be of any type, whether manufactured or natural. Order an
additional 5% extra for cutting wastage and grading allowances (10% for diagonal installations).
During installation, inspect the planks continuously. Defects that can be seen from a standing position should be cut off or held out.
Installing defective planks implies acceptance.
Squeaking and clicking noises are the result of interactions among flooring, joists and subfloors when they move. Limiting the movements of
the flooring system usually eliminates most of these noises. Sometimes, it is impossible to eliminate them completely and minor squeaking
or clicking noises are to be accepted as normal flooring phenomenon. Minor scratches can generally be repaired with the use of putty, stain
or filler. It is an industry standard practice of flooring installation and it should be accepted as normal by the home owner.
If You Need More Information
To assure the warranty is not inadvertently voided, before proceeding with any activity that is not covered in this manual, please contact our
Technical Support Department.
WARNING: CALIFORNIA RESIDENTS
This product can create wood dust and emit formaldehyde of which are known to the State of California to cause cancer.
CAUTION: ASBESTOS IN EXISTING FLOOR
Home Legend product does not contain asbestos. Existing installed resilient flooring and asphaltic adhesive may contain asbestos fillers
or crystalline silica. Do not sand, dry sweep, dry scrape, drill, saw, bead-blast, or mechanically chip or pulverize existing resilient
flooring, backing, lining felt, asphaltic “cutback” adhesive or other adhesive. See Recommended Work Practices for Removal of
Resilient Floor Coverings” (rfci.com) for detailed information and instructions on removing all resilient covering structures.
CAUTION: WOOD DUST
Sawing, sanding and machining this product can produce wood dust. It can cause respiratory, skin and eye irritation. Avoid prolonged
exposure to wood dust. Power tools should be equipped with a dust collector. If possible, perform wood dust generating activities
outdoors. If high dust levels are encountered, use an appropriate NIOSH-designated dust mask.
Page view 0
1 2 3 4 5 6 ... 10 11

Summary of Contents

Page 1 - Installation Instructions

Installation Instructions Engineered Bamboo Plywood Click Flooring Visit homelegend.com for latest version of installation instructions. Doc. ID: 122

Page 2

Doc. ID: 122 Rev: 2 Effective: 2/24/2014 Page | 10 Care and Maintenance Daily Maintenance 1. Sweep dust mop or vacuum your floor regularly to rem

Page 3

Doc. ID: 122 Rev: 2 Effective: 2/24/2014 Page | 11 Warranty This flooring product comes with a Home Legend Limited Wear Warranty. The warranty a

Page 4

Doc. ID: 122 Rev: 2 Effective: 2/24/2014 Page | 2 Acclimation and In-service Conditions Note: Wood moisture content measuring devices will not gi

Page 5

Doc. ID: 122 Rev: 2 Effective: 2/24/2014 Page | 3 It is concrete which rated strength is less than 3000 psi. Perform a quick check by drawing a n

Page 6

Doc. ID: 122 Rev: 2 Effective: 2/24/2014 Page | 4 Note: Floor areas interrupted by wall sections extending out of the wall; floor areas which are

Page 7 - PLEASE NOTE:

Doc. ID: 122 Rev: 2 Effective: 2/24/2014 Page | 5 Pre-install Activities • Subfloors should be in clean condition. • Understand the parts of t

Page 8

Doc. ID: 122 Rev: 2 Effective: 2/24/2014 Page | 6 Floating Installation Step 1 – Install the First Row • When possible, begin installation from

Page 9

Doc. ID: 122 Rev: 2 Effective: 2/24/2014 Page | 7 Glue Down Installation PLEASE NOTE: ANY EXCESS GLUE WHICH GETS ONTO THE SURFACE OF THE FLOOR MU

Page 10

Doc. ID: 122 Rev: 2 Effective: 2/24/2014 Page | 8 Step 4 – Install the remaining Rows • Spread another section of glue. Never spread more that

Page 11

Doc. ID: 122 Rev: 2 Effective: 2/24/2014 Page | 9 Accessories Pictures are for general illustrative purposes only. Actual products may vary from

Comments to this Manuals

No comments